Dongguan Rener Automation Technologies Co.,Ltd
Model No.: RERP003
Power Supply: 220V/50HZ
Air Pressure: 0.6-0.8Mpa
Control System: PLC
Control Mode: Automatic Touch Screen
Place of Origin: China
Supply Ability: 10sets/Year
HS Code: 8479899990
Industrial Robot Arm design applied to the lock screw unit:Automatic locking screw unit for mechanical robot arm and Automatic Machine design module, can be installed in all kinds of machines, through the implementation of its internal mechanism to lock on the specified screws on the workpiece, it can be installed, can also be a combination of vertical installation,can be installed horizontally, can be fixed work on the machine, can also be installed in the mechanical arm mobile operation.
The utility model relates to an automatic locking screw module which can be installed on an automatic machine or a moving robot.
Accurate torque control, including the detection of wear, slippery and leakage lock sensor.
Can be paid at the level, from the bottom to the lock to pay, can be installed at any angle.
The utility model is suitable for the requirement that the screw is vertical or the torsion force is large, and the work station is easy to fatigue.
It can be used with all kinds of machines
Lock screw unit application module
The automatic lock screw unit is used to lock the screws and screws automatic delivery are necessary for automatic screw feed machine.
1. mechanical roller structure, small noise, long life, durable, stable operation.
2. powerful, independent control system, get a command, send the screw immediately and return the feedback signal.
3., can be equipped with 4 channels, you can set the screen after shielding the pipe, replace the product easily.
4., there are many sets of sensors to detect screws, send nails fast, accurate and stable, easy installation and control.
5. industrial design, open structure, even if the material due to poor screw material can also be excluded within a few seconds.
2. Oblique bucket type automatic nailing machine parameters
|The volume||M3X8 standard screw 4000PCS|
| ||Tooth diameter:M1.0 ~ M6.0mm( Optional)|
|Overall length of screw >1.3 screw cap diameter|
| Screw length:within 25mm, the shortest should be in line with the |
|Screw material: metal or hard nonmetal material|
|Efficiency||K101(Equipped with 1 pipes)||60PCS/ minute|
|K102(Equipped with 2 pipes)||30pcs/ minute / pipe(Can be changed to K101 after setting)|
|K103(Equipped with 3 pipes)||20pcs/ minute / pipe(Can be changed to K102 or K101 after setting)|
|K104(Equipped with 4 pipes)||20pcs/ minute / pipe(Can be changed to K102 or K103 after setting)|
|Screw delivery mode:||The screw is conveyed with a transparent tube, and the distance can be sent 10 meters farthest|
|Power Supply:||AC220V 50HZ DC24V|
|Gas source:||pressure 0.5MPa|
|LCD function:||Different machine models and programs can be invoked|
|Adjust blowing screw time, machine sleep time|
|With count function display output. Can be reset, set|
|Alarm display for missing material, missing material and card material;|
|Screw feed inspection:||Most 4pcs sensor detects screws|
|I/O signal||DC 24V Host communication|
|The input and output signals can be collected|
|Noise:||Average 65dB maximum instant 85dB|
|Screw distributor:||Die steel, fine machining, quenching, grinding|
|Screw inclined bucket material:||PC transparent material|
3. Steps of building full automatic line:
1, The product is immature, there is no stable ready-made process, product life cycle, product annual output
2, If there is automatic line, automatic machine or the same type of Production Line for reference.
3, Whether all products can automatic feeding, product structure is suitable for automatic assembly, automatic assembly to change the feeding material, modified materials instead of packaging, part of product structure, product assembly a chamfer there, add to the appropriate.
4, Some testing instruments may be manual, be instead of automatic operation.
5, If the production line site has no limit, determine the length of the production line width.
6. The layout structure of the production line is determined as follows: straight line without load type, straight line horizontal carrier backflow type, straight line download with reflux type, multiple turntable direct connection, turntable plum blossom type, right angle type, U form.
7, The production line standard accessories brand determination.
8, Production line vulnerability and spare parts determination.
9, The production line acceptance standards identified.
10, Both sides of the program audit
11, Price determination, contract with the determination of the two sides to determine the follow-up, single order production delivery.
4. About us:
Dongguan RenerAutomation Technology Co., Ltd. is a high-tech enterprise engaged in R & D,industrial non-standard machinery and equipment production, sales and serviceautomation.Our products are widely used in automatic production of standardfasteners, hardware accessories, auto parts, electronic parts, electricalappliances, plastic hardware, locks, medical equipment accessories, cosmetics,sanitary products and other industries. Undertake mobile phone connector,automotive, medical, hardware, wire, all kinds of consumer electronic products,sanitary products and other non-standard Automation Equipment R & D projectdevelopment, to undertake a variety of plastic Hardware Products productionline, Assembly Line , automatic machine manufacturing, design various automationsolutions.Effective for the enterprises to solve the problems in high cost, lowefficiency and serious quality, recruitment difficulties, labor troubleetc...For all enterprises to save resources, improve efficiency, achieve socialharmony and win-win and customer.
Our main products:plastic & Hardware assembling machine, Sanitary Assembly Machine,Automatic Locking Screw Machine, spring separating feeder machine, we developeda number of sanitary assembly line has been successfully putinto production in the Middle East.Wehave experienced technical backbone and a strong engineering team, and provide overseas machinecommissioning and overseas training experience and service, make the enterpriseproduction line put into production, we provide technical support andthoughtful pre-sale customer service for customers in the industry field, wewill make unremitting efforts to strive for the majority of customer service.Dongguan Rener automation technology limited company's good faith, strength andquality of products recognized by the industry. Welcome friends from all world oflife come to visit, guidance and business negotiation
5. Customer Service:
1) Warranty period:1 years (Non-human damage and other factors)
2) Provide logistics, customs service and foreign installation ,commissioning and operator training service for the machine.
2. How many days will you finish installing & commissioning ?We will finish installation,commissioning and training within 15-25days.
3. What should we charge for your engineer?You should charge for the cost of our engineer's visa, air tickets, hotel, food, and also their salary 50USD one day per person.
4. How long is your machine's warranty period?All our machine have one year guarantee, starting from finished installation.
5. How could we do after one year warranty period?We also can do service for you, but you need pay salary for my technician 80USD/day.
6. How could we do if the parts broken within warranty?We would express the free replacement parts during the warranty date.
7. Does your engineer understand English?Our engineers understand a little English. All of our engineer have more than five years machine installation experience. In addition, they can use body language to communicate with customer.
Product Categories : Robot Production Line