The Carton Packing Machine must check whether the photoelectric tube of the packer is intact before use, and whether there is any dust on the positive and upper part of the reflector, if it is not in the right place, remove the dust above. Because if there is dust on the machine, the packing belt can not be sent to the belt, and the screws and nuts are loosened or not, so it should be tightened in time. If there is a lack of cap and cap, the repairman must be advised to handle it in time.
Check that there is no clogging in the belt rail, and if it has to be removed, the dust in the belt rail is blown out in compressed air.
Check whether the crankshaft part is short of oil. If it is not enough, it is necessary to fill the crankshaft with dipping drop method, usually with a small stick dipped in oil, slowly dripping on the shaft, and can not be poured into the delivery rail with a reverse way. When the belt is skidded, it will not take up the belt, and it will not tighten the belt.
If there are any abnormal phenomena in the process of starting, such as loud noise, large vibration and peculiar smell, if it can't be found, it should stop the automatic baling machine and call the repairmen to deal with it, so as not to cause damage to the internal parts.